Hypo Outdoor Cleaner 2.5L

Dirt, Algae, Mould & Mildew Cleaner

A fast-acting outdoor cleaner designed to remove dirt, algae, mould and mildew from a wide range of exterior surfaces. Ideal for concrete, building cladding and most exterior surfaces — simply spray, brush and rinse for immediate and effective results.

Directions

  1. Attach the hose to the spray applicator.
  2. Adjust the nozzle to Fan for general use or remove nozzle tip for a Jet spray.
  3. Ensure the dial is set to OFF.
  4. Turn on the tap. Briefly switch the dial to WATER to check pressure, then return it to OFF.
  5. Turn the dial to SPRAY to begin application. Apply the product to a dry surface, working from top to bottom for even coverage.
  6. Allow the product to sit for up to 10 minutes (or up to 15 minutes for heavy growth). Do not exceed this time or allow the product to dry.
  7. For best results, scrub the wet surface with a suitable brush.
  8. Rinse thoroughly with clean water by switching the dial back to the WATER setting.
  9. Turn the dial to OFF once finished. Disconnect the hose, and store upright.

  • Tough build-up may require a second treatment after 1–2 months.
  • Some painted finishes may need a more thorough rinse to prevent streaking.
  • In case of accidental contact with plants or lawn areas, rinse immediately with clean water. Disconnect downpipes from water tanks to prevent contamination from wash runoff.

Similar Products

This product not quite right? We've picked out a few more that may suit your application. Alternatively contact your Kemsol representative or email Kemsol for more information.

  • CHLORINE BASED
  • FAST-ACTING
  • IMMEDIATE RESULTS
  • VERSATILE MULTI SURFACE
  • STRONG CLEAN & REMOVAL ACTION
  • QUICK HOSE CONNECT SPRAY SYSTEM

Available Sizes

2.5LFK-HOC25

Downloads

Chemical Solutions Sustainability Policy

We are committed to continual improvement in our environmental performance, and have established a number of goals and initiatives helping achieve this objective.

Where possible we always use biodegradable raw materials and all our finished product packaging is reusable or recyclable.

This is only a start, we continually strive to better our environmental performance. Visit chemicalsolutions.co.nz for more information.

Interested in Media Hub? Contact Us

MPI Catalogue

Free download!

Example of Kemsol MPI Catalogue

A handy guide containing all our Kemsol products with MPI approval

Click to get your copy