Concentrated surface cleaner that rejuvenates exterior surfaces. Suitable for wooden decks, and other semiporous surfaces such as concrete drive ways and organic soiling. Non-caustic, non-chlorinated and non-acidic formula.
CONCRETE/TILED SURFACES: Dissolve 5 scoops into a plastic bucket with 5 litres of hot water. Allow the solution to sit for approx 3-5 mins then evenly pour directly over surfaces. Leave for 2 mins to activate then scrub with a brush or stiff broom, adding more solution to surfaces as required. Rinse well and allow to dry. WOODEN DECKS/SURFACES: Use the same process as above, however a more even coverage may be achieved with the use of a plastic watering can, while also reducing product wastage through gaps in decking timber. AGENT-OXY may be used with spray equipment, as long as product is completely dissolved. Always rinse or wash areas with fresh water to finish. While AGENT-OXY should not cause any damage to plants, foliage or animal life, always immediately rinse the product off with fresh cold water. AGENT-OXY is designed for ‘best use’ with hot water, above 50-60°c and it will foam up on application.
This product not quite right? We've picked out a few more that may suit your application. Alternatively contact your Kemsol representative or email Kemsol for more information.
| 10KG | FK-AGOX10 |
| 5KG | FK-AGOX04 |
We are committed to continual improvement in our environmental performance, and have established a number of goals and initiatives helping achieve this objective.
Where possible we always use biodegradable raw materials and all our finished product packaging is reusable or recyclable.
This is only a start, we continually strive to better our environmental performance. Visit chemicalsolutions.co.nz for more information.
©2024 Kemsol. Site by Zulu Shopfront
A handy guide containing all our Kemsol products with MPI approval
Click to get your copy
Log in to Media Hub 
