Biodegradable, non-corrosive, chlorinated powder for soaking; or spray and wipe applications. The stable, soluble formula is ideal as a diluted cleaner, descaler and sanitiser. Great for removal of stains and fogging on glasses, cups and cutlery.
Glass & Cutlery: Soak in 30gm (1 scoop) to 5L cold/warm water for minimum 5 mins. Rinse prior to use.
Wipedown Cloths: Soak in 30 - 60gm (1 - 2 scoops) to 5L cold/warm water for 15 - 20 mins. Rinse and air dry before use.
CIP Equipment Sanitising: 3gm per 1L or 1 teaspoon per 2L potable water. Circulate for minimum 10 mins and fully flush-rinse system before re-use. (100PPM FAC)
Hard Surface Spray Sanitising: 10gm per 1L of potable water. Spray over surfaces and wipe with a clean cloth or paper towel. (300ppm FAC)
A full included scoop provides approx 30gm.
Under Good Practice Protocol based on accepted international research a 2% solution of this product, diluted with potable water, is recommended with liberal application on clean hard surfaces with a minimum contact time of 5 minutes. At this concentration the product provides 600PPM FAC.
This product not quite right? We've picked out a few more that may suit your application. Alternatively contact your Kemsol representative or email Kemsol for more information.
| 1KG | FK-SANBR12 |
| 4.5KG | FK-SANBR4.5 |
| APP Spray | FS11-APPLICATOR |
We are committed to continual improvement in our environmental performance, and have established a number of goals and initiatives helping achieve this objective.
Where possible we always use biodegradable raw materials and all our finished product packaging is reusable or recyclable.
This is only a start, we continually strive to better our environmental performance. Visit chemicalsolutions.co.nz for more information.
©2026 Kemsol. Site by Zulu Shopfront
A handy guide containing all our Kemsol products with MPI approval
Click to get your copy
Log in to Media Hub 
