Second part of a two-part cleaning system for descaling and sanitising industrial and commercial dishwashers.
PVC rubber gloves and wrap around safety glasses essential.
Ensure PART A has been completed prior to starting PART B.
Approximately fill main wash tank.
Add Descale B to wash tank at a ratio of 1 LTR to every 5 LTRS of wash water. (ie if wash tank is 10LTRS then add 2LTRS of Descale B when tank is 70% full and check that chemical is not going down the overflow drain).
Allow tank to completely fill as Rinse Water fills tank.
Cycle Machine for 8-10 X 1 minute cycles, checking scale removal results as you go. Scale should become removed from the surface.
Agitate with a stiff brush to assist break up scale, as required through wash cycles.
Remove drain bung and empty wash tank solution.
Refill wash tank with fresh water, and circulate for 3 X 1 minute cycles.
Remove drain bung and empty wash tank solution.
Turn chemical dosing pump on and ensure wash tank is refilled and detergent supply returns to acceptable dosing level via titration tests.
Never mix with Descale Part A.
This product not quite right? We've picked out a few more that may suit your application. Alternatively contact your Kemsol representative or email Kemsol for more information.
| Descale Part B (5L) | FK-DESB05 |
We are committed to continual improvement in our environmental performance, and have established a number of goals and initiatives helping achieve this objective.
Where possible we always use biodegradable raw materials and all our finished product packaging is reusable or recyclable.
This is only a start, we continually strive to better our environmental performance. Visit chemicalsolutions.co.nz for more information.
©2024 Kemsol. Site by Zulu Shopfront
A handy guide containing all our Kemsol products with MPI approval
Click to get your copy
Log in to Media Hub 
