Water hardness build up and milk stone removal Requires a 2.5% solution in hot water (65°C) to be circulated for 15-30 minutes then rinsed. Cooler water may be used with higher concentrations or longer contact times. Rinse with cold water. Rust removal Use neat or dilute to 20% solution. Apply to surface and leave for 5-30 minutes before rinsing with cold water.
Under Good Practice Protocol based on accepted international research a 1% solution of this product, diluted with potable water, is recommended with liberal application on clean hard surfaces with a minimum contact time of 10 minutes. At this concentration the product provides 100PPM QAC.
This product not quite right? We've picked out a few more that may suit your application. Alternatively contact your Kemsol representative or email Kemsol for more information.
| Phosclean (5L) | FK-PHOSCL05 |
| Phosclean (20L) | FK-PHOSCL20 |
| Phosclean (200L) | FK-PHOSCL200 |
We are committed to continual improvement in our environmental performance, and have established a number of goals and initiatives helping achieve this objective.
Where possible we always use biodegradable raw materials and all our finished product packaging is reusable or recyclable.
This is only a start, we continually strive to better our environmental performance. Visit chemicalsolutions.co.nz for more information.
©2024 Kemsol. Site by Zulu Shopfront
A handy guide containing all our Kemsol products with MPI approval
Click to get your copy
Log in to Media Hub 
